Class Player

Definition

Namespace:

Tizen.Multimedia

Assembly:

Tizen.Multimedia.MediaPlayer.dll

Provides the ability to control media playback.

public class Player : IDisposable

Inheritance

object

Player

Implements

System.IDisposable

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

Constructors

Player()

Initializes a new instance of the Player class.

Declaration

public Player()

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

Properties

AdaptiveVariants

Gets the adaptive variants settings.

Declaration

public AdaptiveVariants AdaptiveVariants { get; }

Property Value

Type	Description
AdaptiveVariants

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

AudioCodecType

Gets or sets the default codec type of the audio decoder.

Declaration

public CodecType AudioCodecType { get; set; }

Property Value

Type	Description
CodecType	A CodecType specifies the type. The default codec type could be different depending on the device capability.

Remarks

To set, the player must be in the Idle state.

If H/W audio codec type is not supported in some cases, S/W audio codec type could be used instead.

The availability could be changed depending on the codec capability. If an application wants to use the H/W audio codec type as default, The following functions should be called after the codec type is set. :
IsAvailable
EnableExportingAudioData(AudioMediaFormat, PlayerAudioExtractOption)
DisableExportingAudioData()
ReplayGain
AudioPitch
AudioPitchEnabled

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentException	The value is not valid.
System.InvalidOperationException	The player is not in the valid state. -or- Operation failed; internal error.
CodecNotSupportedException	The selected codec is not supported.

AudioEffect

Gets the audio effect.

Declaration

public AudioEffect AudioEffect { get; }

Property Value

Type	Description
AudioEffect

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

Exceptions

Type	Condition
System.NotSupportedException	The required feature is not supported.

AudioLatencyMode

Gets or sets the audio latency mode.

Declaration

public AudioLatencyMode AudioLatencyMode { get; set; }

Property Value

Type	Description
AudioLatencyMode	A AudioLatencyMode that specifies the mode. The default is Mid.

Remarks

If the mode is High, audio output interval can be increased, so it can keep more audio data to play. But, state transition like pause or resume can be more slower than default(Mid).

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentException	The value is not valid.
NotAvailableException	If audio offload is enabled by calling IsEnabled. (Since tizen 6.0)

See Also

AudioOffload

AudioOffload

Gets the setting for audio offload.

Declaration

public AudioOffload AudioOffload { get; }

Property Value

Type	Description
AudioOffload

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

AudioPitch

Gets or sets the pitch of audio.

Declaration

public float AudioPitch { get; set; }

Property Value

Type	Description
float	The audio stream pitch value. The default is 1.

Remarks

Enabling pitch control could increase the CPU usage on some devices. This function is used for audio content only. This function could be unavailable depending on the audio codec type.

Exceptions

Type	Condition
System.InvalidOperationException	A pitch is not enabled.
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentOutOfRangeException	value is less than 0.5. -or- value is greater than 2.0.
NotAvailableException	If audio offload is enabled by calling IsEnabled. (Since tizen 6.0) -or- The function is not available depending on the audio codec type. (Since tizen 6.0)

See Also

AudioPitchEnabled

AudioOffload

AudioCodecType

AudioPitchEnabled

Enables or disables controlling the pitch of audio. Gets the status of controlling the pitch of audio.

Declaration

public bool AudioPitchEnabled { get; set; }

Property Value

Type	Description
bool	The value indicating whether or not AudioPitch is enabled. The default is false.

Remarks

This function is used for audio content only. To set, the player must be in the Idle state. This function could be unavailable depending on the audio codec type.

Exceptions

Type	Condition
System.InvalidOperationException	The player is not in the valid state.
System.ObjectDisposedException	The player has already been disposed of.
NotAvailableException	If audio offload is enabled by calling IsEnabled. (Since tizen 6.0) -or- The function is not available depending on the audio codec type. (Since tizen 6.0)

See Also

AudioPitch

AudioOffload

AudioCodecType

AudioTrackInfo

Gets the track info for the audio.

Declaration

public PlayerTrackInfo AudioTrackInfo { get; }

Property Value

Type	Description
PlayerTrackInfo	A PlayerTrackInfo for audio.

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

BufferingTime

Gets or sets the streaming buffering time.

Declaration

public PlayerBufferingTime BufferingTime { get; set; }

Property Value

Type	Description
PlayerBufferingTime

Remarks

To set, the player must be in the Idle state.

Exceptions

Type	Condition
System.InvalidOperationException	The player is not in the valid state.
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentOutOfRangeException	is less than -1. -or- is less than -1.
System.NotSupportedException	The required feature is not supported.

See Also

PlayerBufferingTime

Cookie

Gets or sets the cookie for streaming playback.

Declaration

public string Cookie { get; set; }

Property Value

Type	Description
string

Remarks

To set, the player must be in the Idle state.

Exceptions

Type	Condition
System.InvalidOperationException	The player is not in the valid state.
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentNullException	The value to set is null.

Display

Gets or sets the display.

Declaration

public Display Display { get; set; }

Property Value

Type	Description
Display	A Display that specifies the display.

Remarks

The player must be in the Idle state.
The raw video feature(http://tizen.org/feature/multimedia.raw_video) is required if the display is created with MediaView.
If a user wants to use video and UI sync mode, please use Display(Window, bool).(Since tizen 6.5)
But DisplaySettings is not supported in UI sync mode.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentException	The value has already been assigned to another player.
System.InvalidOperationException	The player is not in the valid state.
System.NotSupportedException	The required feature is not supported.

DisplaySettings

Gets the display settings.

Declaration

public PlayerDisplaySettings DisplaySettings { get; }

Property Value

Type	Description
PlayerDisplaySettings	A PlayerDisplaySettings that specifies the display settings.

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

Handle

Gets the native handle of the player.

Declaration

public IntPtr Handle { get; }

Property Value

Type	Description
System.IntPtr	An IntPtr that contains the native handle of the player.

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.

IsAudioOnly

Gets or sets the audio-only state.

Declaration

public bool IsAudioOnly { get; set; }

Property Value

Type	Description
bool	true if the playback is audio-only mode; otherwise, false. The default value is false.

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

Exceptions

Type	Condition
System.InvalidOperationException	The player is not in the valid state.
System.ObjectDisposedException	The player has already been disposed of.

IsLooping

Gets or sets the looping state.

Declaration

public bool IsLooping { get; set; }

Property Value

Type	Description
bool	true if the playback is looping; otherwise, false. The default value is false.

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.

Muted

Gets or sets the mute state.

Declaration

public bool Muted { get; set; }

Property Value

Type	Description
bool	true if the player is muted; otherwise, false.

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.

ReplayGain

Gets or sets the player's replaygain state.

Declaration

public bool ReplayGain { get; set; }

Property Value

Type	Description
bool	If the replaygain status is true, replaygain is applied (if contents has a replaygain tag); otherwise, the replaygain is not affected by tag and properties.

Remarks

This function could be unavailable depending on the audio codec type.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.
NotAvailableException	If audio offload is enabled by calling IsEnabled. (Since tizen 6.0) -or- The function is not available depending on the audio codec type. (Since tizen 6.0)

See Also

AudioOffload

AudioCodecType

SphericalVideo

Gets the spherical video settings.

Declaration

public SphericalVideo SphericalVideo { get; }

Property Value

Type	Description
SphericalVideo

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

State

Gets the state of the player.

Declaration

public PlayerState State { get; }

Property Value

Type	Description
PlayerState	The current state of the player.

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.

StreamInfo

Gets the stream information.

Declaration

public StreamInfo StreamInfo { get; }

Property Value

Type	Description
StreamInfo	A StreamInfo for this player.

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

SubtitleTrackInfo

Gets the track info for the subtitle.

Declaration

public PlayerTrackInfo SubtitleTrackInfo { get; }

Property Value

Type	Description
PlayerTrackInfo	A PlayerTrackInfo for the subtitle.

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

UserAgent

Gets or sets the user agent for streaming playback.

Declaration

public string UserAgent { get; set; }

Property Value

Type	Description
string

Remarks

To set, the player must be in the Idle state.

Exceptions

Type	Condition
System.InvalidOperationException	The player is not in the valid state.
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentNullException	The value to set is null.

Volume

Gets or sets the current volume.

Declaration

public float Volume { get; set; }

Property Value

Type	Description
float

Remarks

Valid volume range is from 0 to 1.0, inclusive.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentOutOfRangeException	value is less than zero. -or- value is greater than 1.0.

Methods

ApplyAudioStreamPolicy(AudioStreamPolicy)

Applies the audio stream policy.

Declaration

public void ApplyAudioStreamPolicy(AudioStreamPolicy policy)

Parameters

Type	Name	Description
AudioStreamPolicy	policy	The AudioStreamPolicy to apply.

Remarks

The player must be in the Idle state.

Player does not support all AudioStreamType.
Supported types are Media, System, Alarm, Notification, Emergency, VoiceInformation, RingtoneVoip and MediaExternalOnly.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of. -or- policy has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.
System.ArgumentNullException	policy is null.
System.NotSupportedException	The required feature is not supported. -or- AudioStreamType of policy is not supported on the current platform.

See Also

AudioStreamPolicy

CaptureVideoAsync()

Captures a video frame, asynchronously.

Declaration

public Task<CapturedFrame> CaptureVideoAsync()

Returns

Type	Description
System.Threading.Tasks.Task<TResult><CapturedFrame>	A task that represents the asynchronous capture operation.

Remarks

The player must be in the Playing or Paused state.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.
System.NotSupportedException	The required feature is not supported.

ClearSubtitle()

Removes the subtitle path.

Declaration

public void ClearSubtitle()

Remarks

The player must be in the Idle state.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.

DisableExportingAudioData()

Disable to decode an audio data.

Declaration

public void DisableExportingAudioData()

Remarks

The player must be in the Idle or Ready state. This function could be unavailable depending on the audio codec type.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.
NotAvailableException	The function is not available depending on the audio codec type. (Since tizen 6.0)

See Also

EnableExportingAudioData(AudioMediaFormat, PlayerAudioExtractOption)

AudioCodecType

DisableExportingVideoFrame()

Disables to decode a video data.

Declaration

public void DisableExportingVideoFrame()

Remarks

The player must be in the Idle or Ready state.

Exceptions

Type	Condition
System.NotSupportedException	The required feature is not supported.
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.

See Also

EnableExportingVideoFrame()

Dispose()

Releases all resources used by the current instance.

Declaration

public void Dispose()

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

EnableExportingAudioData(AudioMediaFormat, PlayerAudioExtractOption)

Enable to decode an audio data for exporting PCM from a data.

Declaration

public void EnableExportingAudioData(AudioMediaFormat format, PlayerAudioExtractOption option)

Parameters

Type	Name	Description
AudioMediaFormat	format	The media format handle required to audio PCM specification. The format has to include MimeType, Channel and SampleRate. If the format is NULL, the original PCM format or platform default PCM format will be applied.
PlayerAudioExtractOption	option	The audio extract option.

Remarks

The player must be in the Idle state.

A AudioDataDecoded event is called in a separate thread(not in the main loop).

The audio PCM data can be retrieved using a AudioDataDecoded event as a media packet and it is available until it's destroyed by Dispose(). The packet has to be destroyed as quickly as possible after rendering the data and all the packets have to be destroyed before Unprepare() is called.

This function could be unavailable depending on the audio codec type.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentException	The value is not valid.
System.InvalidOperationException	Operation failed; internal error. -or- The player is not in the valid state.
NotAvailableException	If audio offload is enabled by calling IsEnabled. (Since tizen 6.0) -or- The function is not available depending on the audio codec type. (Since tizen 6.0)

See Also

PlayerAudioExtractOption

DisableExportingAudioData()

AudioOffload

AudioCodecType

EnableExportingVideoFrame()

Enables to decode a video data for every frame.

Declaration

public void EnableExportingVideoFrame()

Remarks

The player must be in the Idle state, but Display must not be set.

A VideoFrameDecoded event is called in a separate thread, not called in the main loop.

The video frame can be retrieved using a VideoFrameDecoded event with a media packet parameter. If you change the media packet in the VideoFrameDecoded event, it will be displayed on the device. The callback function holds the same buffer that is drawn on the display device. and the MediaPacket is available until it is destroyed by Dispose(). It is recommended to destroy the packet as quickly as possible after the decoded data is rendered on the display. All the packets have to be destroyed before Unprepare() is called.

Exceptions

Type	Condition
System.NotSupportedException	The required feature is not supported.
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	Operation failed; internal error. -or- The player is not in the valid state.

See Also

DisableExportingVideoFrame()

GetDownloadProgress()

Gets the streaming download progress.

Declaration

public DownloadProgress GetDownloadProgress()

Returns

Type	Description
DownloadProgress	The DownloadProgress containing current download progress.

Remarks

The player must be in the Ready, Playing, or Paused state.

Exceptions

Type	Condition
System.InvalidOperationException	The player is not streaming. -or- The player is not in the valid state.
System.ObjectDisposedException	The player has already been disposed of.

GetPlayPosition()

Gets the play position in milliseconds.

Declaration

public int GetPlayPosition()

Returns

Type	Description
int	The current position in milliseconds.

Remarks

The player must be in the Ready, Playing, or Paused state.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.

See Also

SetPlayPositionAsync(int, bool)

SetPlayPositionNanosecondsAsync(long, bool)

GetPlayPositionNanoseconds()

GetPlayPositionNanoseconds()

Gets the play position in nanoseconds.

Declaration

public long GetPlayPositionNanoseconds()

Returns

Type	Description
long	The current position in nanoseconds.

Remarks

The player must be in the Ready, Playing, or Paused state.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.

See Also

SetPlayPositionAsync(int, bool)

SetPlayPositionNanosecondsAsync(long, bool)

GetPlayPosition()

GetVideoRoi()

Get the relative ROI (Region Of Interest) area as a decimal fraction based on the video source.

Declaration

public ScaleRectangle GetVideoRoi()

Returns

Type	Description
ScaleRectangle	The ScaleRectangle containing the ROI area information.

Remarks

The specified ROI area is valid only in Tizen.Multimedia.PlayerDisplayType.Overlay.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	Operation failed; internal error.

See Also

Display

GetVideoProperties()

SetVideoRoi(ScaleRectangle)

OnPreparing()

Called when the Tizen.Multimedia.Player.Prepare is invoked.

Declaration

protected virtual void OnPreparing()

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

OnUnprepared()

Called after the Player is unprepared.

Declaration

protected virtual void OnUnprepared()

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

See Also

Unprepare()

Pause()

Pauses the player.

Declaration

public virtual void Pause()

Remarks

The player must be in the Playing state. It has no effect if the player is already in the Paused state.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.

See Also

Start()

PrepareAsync()

Prepares the media player for playback, asynchronously.

Declaration

public virtual Task PrepareAsync()

Returns

Type	Description
System.Threading.Tasks.Task	A task that represents the asynchronous prepare operation.

Remarks

To prepare the player, the player must be in the Idle state, and a source must be set.

Exceptions

Type	Condition
System.InvalidOperationException	No source is set.
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.

See Also

Preparing

PrepareAsync(CancellationToken)

Prepares the cancelable media player for playback, asynchronously.

Declaration

public virtual Task PrepareAsync(CancellationToken cancellationToken)

Parameters

Type	Name	Description
System.Threading.CancellationToken	cancellationToken	The cancellation token to cancel preparing.

Returns

Type	Description
System.Threading.Tasks.Task	The task that represents the asynchronous prepare operation.

Remarks

To prepare the player, the player must be in the Idle state, and a source must be set. The state must be Preparing to cancel preparing. When preparing is cancelled, a state will be changed to Idle from Preparing.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed.
System.InvalidOperationException	Operation failed; internal error. -or- The player is not in the valid state.

See Also

System.Threading.CancellationToken

PrepareAsync()

Unprepare()

SetPlaybackRate(float)

Sets the playback rate.

Declaration

public void SetPlaybackRate(float rate)

Parameters

Type	Name	Description
float	rate	The value for the playback rate. Valid range is -5.0 to 5.0, inclusive.

Remarks

The player must be in the Ready, Playing, or Paused state.

The sound will be muted, when the playback rate is under 0.0 or over 2.0.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state. -or- Streaming playback.
System.ArgumentOutOfRangeException	rate is less than -5.0. -or- rate is greater than 5.0. -or- rate is zero.
NotAvailableException	If audio offload is enabled by calling IsEnabled. (Since tizen 6.0)

See Also

AudioOffload

SetPlayPositionAsync(int, bool)

Sets the seek position for playback, asynchronously.

Declaration

public Task SetPlayPositionAsync(int position, bool accurate)

Parameters

Type	Name	Description
int	position	The value indicating a desired position in milliseconds.
bool	accurate	The value indicating whether the operation performs with accuracy.

Returns

Type	Description
System.Threading.Tasks.Task	A task that represents the asynchronous operation.

Remarks

The player must be in the Ready, Playing, or Paused state.

If the accurate is true, the play position will be adjusted as the specified position value, but this might be considerably slow. If false, the play position will be a nearest keyframe position.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state. -or- In case of non-seekable content, the player will return error and keep playing without changing the play position.
System.ArgumentOutOfRangeException	The specified position is not valid.

See Also

SetPlayPositionNanosecondsAsync(long, bool)

GetPlayPosition()

GetPlayPositionNanoseconds()

SetPlayPositionNanosecondsAsync(long, bool)

Sets the seek position in nanoseconds for playback, asynchronously.

Declaration

public Task SetPlayPositionNanosecondsAsync(long position, bool accurate)

Parameters

Type	Name	Description
long	position	The value indicating a desired position in nanoseconds.
bool	accurate	The value indicating whether the operation performs with accuracy.

Returns

Type	Description
System.Threading.Tasks.Task	A task that represents the asynchronous operation.

Remarks

The player must be in the Ready, Playing, or Paused state.

If the accurate is true, the play position will be adjusted as the specified position value, but this might be considerably slow. If false, the play position will be a nearest keyframe position.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state. -or- In case of non-seekable content, the player will return error and keep playing without changing the play position.
System.ArgumentOutOfRangeException	The specified position is not valid.

See Also

SetPlayPositionAsync(int, bool)

GetPlayPosition()

GetPlayPositionNanoseconds()

SetSource(MediaSource)

Sets a media source for the player.

Declaration

public void SetSource(MediaSource source)

Parameters

Type	Name	Description
MediaSource	source	A MediaSource that specifies the source for playback.

Remarks

The player must be in the Idle state.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state. -or- It is not able to assign the source to the player.
System.UnauthorizedAccessException	Thrown when the permission is denied.

See Also

PrepareAsync()

PrepareAsync(CancellationToken)

SetSubtitle(string)

Sets the subtitle path for playback.

Declaration

public void SetSubtitle(string path)

Parameters

Type	Name	Description
string	path	The absolute path of the subtitle file, it can be NULL in the Idle state.

Remarks

Only MicroDVD/SubViewer(.sub), SAMI(.smi), and SubRip(*.srt) subtitle formats are supported.

The mediastorage privilege(http://tizen.org/privilege/mediastorage) must be added if any files are used to play located in the internal storage. The externalstorage privilege(http://tizen.org/privilege/externalstorage) must be added if any files are used to play located in the external storage.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.ArgumentException	path is an empty string.
System.IO.FileNotFoundException	The specified path does not exist.
System.ArgumentNullException	path is null.

SetSubtitleOffset(int)

Sets the offset for the subtitle.

Declaration

public void SetSubtitleOffset(int offset)

Parameters

Type	Name	Description
int	offset	The value indicating a desired offset in milliseconds.

Remarks

The player must be in the Playing or Paused state.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state. -or- No subtitle is set.

See Also

SetSubtitle(string)

SetVideoRoi(ScaleRectangle)

Set the relative ROI (Region Of Interest) area as a decimal fraction based on the video source. It can be regarded as zooming operation because the specified video area will be rendered to fit to the display.

Declaration

public void SetVideoRoi(ScaleRectangle scaleRectangle)

Parameters

Type	Name	Description
ScaleRectangle	scaleRectangle	The containing the ROI area information.

Remarks

This function requires the ratio of the each coordinate and size to the video resolution size to guarantee of showing the same area for the dynamic resolution video content. This function have to be called after setting Display

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	Operation failed; internal error. -or- The Tizen.Multimedia.PlayerDisplayType is not set to Tizen.Multimedia.PlayerDisplayType.Overlay.
System.ArgumentOutOfRangeException	scaleRectangle.ScaleX.ScaleX is less than 0.0 or greater than 1.0. -or- scaleRectangle.ScaleY.ScaleY is less than 0.0 or greater than 1.0. -or- scaleRectangle.ScaleWidth.ScaleWidth is less than or equal to 0.0 or greater than 1.0. -or- scaleRectangle.ScaleHeight.ScaleHeight is less than or equal to 0.0 or greater than 1.0.

See Also

ScaleRectangle

Display

GetVideoProperties()

GetVideoRoi()

Start()

Starts or resumes playback.

Declaration

public virtual void Start()

Remarks

Sound can be mixed with other sounds if you don't control the stream focus using ApplyAudioStreamPolicy(AudioStreamPolicy).

Before Tizen 5.0, The player must be in the Ready or Paused state. It has no effect if the player is already in the Playing state.

Since Tizen 5.0, The player must be in the Ready, Playing, or Paused state.
In case of HTTP streaming playback, the player could be internally paused for buffering. If the application calls this function during the buffering, the playback will be resumed by force and the buffering message posting by BufferingProgressChanged will be stopped.
In other cases, the player will keep playing without returning error.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.

See Also

PrepareAsync()

PrepareAsync(CancellationToken)

Stop()

Pause()

PlaybackCompleted

ApplyAudioStreamPolicy(AudioStreamPolicy)

BufferingProgressChanged

Stop()

Stops playing the media content.

Declaration

public virtual void Stop()

Remarks

The player must be in the Playing or Paused state. It has no effect if the player is already in the Ready state.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.

See Also

Start()

Pause()

Unprepare()

Unprepares the player.

Declaration

public virtual void Unprepare()

Remarks

The most recently used source is reset and is no longer associated with the player. Playback is no longer possible. If you want to use the player again, you have to set a source and call PrepareAsync() or PrepareAsync(CancellationToken) again.

The player must be in the Ready, Playing, or Paused state. It has no effect if the player is already in the Idle state.

Exceptions

Type	Condition
System.ObjectDisposedException	The player has already been disposed of.
System.InvalidOperationException	The player is not in the valid state.

Events

AudioDataDecoded

Occurs when a audio frame is decoded.

Declaration

public event EventHandler<AudioDataDecodedEventArgs> AudioDataDecoded

Event Type

Type	Description
System.EventHandler<TEventArgs><AudioDataDecodedEventArgs>

Remarks

The event handler will be executed on an internal thread.

The Packet in event args should be disposed after use.

See Also

Packet

BufferingProgressChanged

Occurs when there is a change in the buffering status of streaming.

Declaration

public event EventHandler<BufferingProgressChangedEventArgs> BufferingProgressChanged

Event Type

Type	Description
System.EventHandler<TEventArgs><BufferingProgressChangedEventArgs>

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

ErrorOccurred

Occurs when any error occurs.

Declaration

public event EventHandler<PlayerErrorOccurredEventArgs> ErrorOccurred

Event Type

Type	Description
System.EventHandler<TEventArgs><PlayerErrorOccurredEventArgs>

Remarks

The event handler will be executed on an internal thread.

PlaybackCompleted

Occurs when the playback of a media is finished.

Declaration

public event EventHandler<EventArgs> PlaybackCompleted

Event Type

Type	Description
System.EventHandler<TEventArgs><System.EventArgs>

Remarks

The player provides functions to play a media content. It also provides functions to adjust the configurations of the player such as playback rate, volume, looping etc. Note that only one video player can be played at one time.

PlaybackInterrupted

Occurs when the playback of a media is interrupted.

Declaration

public event EventHandler<PlaybackInterruptedEventArgs> PlaybackInterrupted

Event Type

Type	Description
System.EventHandler<TEventArgs><PlaybackInterruptedEventArgs>

Remarks

If the reason is ResourceConflict, the player state will be one of Idle, Ready, or Paused.

See Also

State

SubtitleUpdated

Occurs when the subtitle is updated.

Declaration

public event EventHandler<SubtitleUpdatedEventArgs> SubtitleUpdated

Event Type

Type	Description
System.EventHandler<TEventArgs><SubtitleUpdatedEventArgs>

Remarks

The event handler will be executed on an internal thread.

VideoFrameDecoded

Occurs when a video frame is decoded.

Declaration

public event EventHandler<VideoFrameDecodedEventArgs> VideoFrameDecoded

Event Type

Type	Description
System.EventHandler<TEventArgs><VideoFrameDecodedEventArgs>

Remarks

The event handler will be executed on an internal thread.

The Packet in event args should be disposed after use.

Exceptions

Type	Condition
System.NotSupportedException	The required feature is not supported.

See Also

Packet

VideoStreamChanged

Occurs when the video stream is changed.

Declaration

public event EventHandler<VideoStreamChangedEventArgs> VideoStreamChanged

Event Type

Type	Description
System.EventHandler<TEventArgs><VideoStreamChangedEventArgs>

Remarks

The event handler will be executed on an internal thread.

Implements

System.IDisposable